All of
our Pro X Series Fat Sacs™ are constructed with
a white water rafting material called Valmex.
These sacs are unbelievably durable and no
longer need the support of an outer shell. They
also come equipped with our Quick Connect Valve
system which makes filling and draining these
things an easy task. Furthermore, the placement
of our valves makes it possible to daisy-chain
the sacs to create the perfect integrated
ballast system. All sacs are available in
assorted colors so you can customize the look of
your system.
Pro X Series Fat Sac™ -
W707
dimensions: 50 x 20 x 20
weight: 750 lbs. / 340 kg.
The
original fat sac™ redefined and setting new
standards. These sacs are the most demanded sacs
on the market for their durability and ease of
use. Two of these on either side of the engine
will add 1500 lbs. of ballast when full.
Pro X Series V-Drive
Sacs (set) - W701
dimensions: 42 x 16 x 16
weight: 400 lbs. / 181 kg. each
The Pro
X Series V-Drive Sacs are exactly what you think
they are. Designed to fit in the compartments on
either side of the engine in v-drive boats,
these sacs are perfect for the ballast you need.
They are similar in size to our Fat Sac™ but a
bit shorter in length for a perfect fit.
Combined with the weight of the engine, these
sacs will produce a monster wake.
Pro X Series Tube Sac -
W704
dimensions: 62 x 16 x
10 weight: 370 lbs. / 168
kg.
The Pro
X Series Tube Sac can be used in the ski locker
of your boat or on the floor just forward of the
engine compartment. It’s longer and narrow
enough to fit perfectly along the walkway to the
bow. You could also opt for one in the ski
locker and one on the floor above it.
Pro X Series Side Sacs
(set) - W703
dimensions: 48 x 12 x 12
weight: 260 lbs. / 118 kg. each
The Pro
X Series Side Sacs fit along the side of the
engine compartment on inboard boats. They are
designed to get more weight to the center of the
boat to balance any ballast you may have aft of
the engine. Their narrow profile also makes for
a better fit than a Fat Sac™.
Pro X Series Fat Seat -
W710
dimensions: body- 26 x
63 x 13 arms- 58 x 13 x 13
weight: 1525 lbs. / 692 kg.
The Pro
X Series Fat Seat is design for inboard boats
that have a removable rear seat. This thing is
huge and it’s strong enough to sit on. It has
two arms that extend forward on either side of
the engine compartment to add even more weight.
Pro X Series Rear Seat
Sac - W705
dimensions: 60 x 26 x 10
weight: 650 lbs. / 295 kg.
The Pro
X Series Rear Seat Sac is a smaller version of
the Fat Seat minus the arms. It has a lower
profile but adds a lot of weight to the rear of
the boat, leaving your compartments open for
storage.
Pro X Series Open Bow
Sac - W706
dimensions: 54 x 54 x 54 x 12
weight: 1000 lbs. / 454 kg.
The Pro X Series Open Bow
Sac is triangular in shape and fits open bow
boats. Just set it up front and fill it. The
size of this sac allows you to fine-tune the
forward and aft weight distribution. Chances are
that this is the only sac you will need up
front.
Pro X Series Integrated
Bow Sac - W711
dimensions: body- 20 x 29 x 12 arms- 32 x 12
x 12 weight: 650 lbs. /
295 kg.
The Pro X Series
Integrated Bow Sac is designed to fit under the
seats of open bow boats adding needed weight to
the front of the boat for the perfect weight
distribution. It will fit under the seats of any
open bow boat so it’s out of the way and the
seats are still available for use.
Pro X Series Inboard
Wake Surf Sac - W716
dimensions: body- 20 x 22 x 12 arms- 50 x 12
x 12 weight: 700 lbs. /
318 kg.
The Pro X Series Inboard
Wake Surf Sac is ideal for your inboard boat.
Its shape places the weight where you need it to
create the desired wake for wake surfing.
Combine this sac with the Fat Brick to tailor
the wake for your specific needs.
Pro X Series V-Drive
Wake Surf Sac - W713
dimensions: 42 x 16 x 16
weight: 400 lbs. / 181 kg.
The Pro X Series V-Drive
Wake Surf Sac fits perfectly in the compartment
of your v-drive boat to produce a nice wake for
surfing. Try combining this sac with the Pro X
Series Fat Brick to help you control the shape
of your wake.
Pro X Series Fat Brick -
W702
dimensions: 16 x 16 x 16
weight: 155 lbs. / 70 kg.
Do you have a “larger”
buddy that makes it difficult to balance the
weight distribution in your ride? The Pro X
Series Fat Brick will help you solve this
problem. This little thing weighs in at 155
pounds when full. Its handles and compact size
allow you to quickly reposition it to fine-tune
the boat’s wake and eliminate any unwanted wash.
Rear Gravity Games Sac -
W841
dimensions: 42 x 19 x 19
weight: 565 lbs. / 256 kg.
The
Rear Gravity Games Sac is built to fit in the
compartment of v-drive boats. Two of these sacs
combined with the Center Gravity Games Sac
provide over 2,300 lbs. additional ballast to
your boat. It’s easy to see why this is the
combination used in all the Gravity Games boats.
They will produce a huge, clean wake that will
boot you for explosive moves.
Center Gravity Games Sac
- W842
dimensions: 88 x 19 x 19
weight: 1180 lbs. / 535 kg.
Take
the Pro X Series Fat Sac™ and add 38 inches to
its length... that’s right, this thing is
massive. The Center Gravity Games Sac is only
one inch smaller in width and height but at over
3 feet longer, it weighs in at nearly twice the
weight of a single Fat Sac™. Try combining this
sac with two Rear Gravity Games Sacs for one
monster of a wake.
| PART#
558031 |
2 |
Custom
Rear V-Drive Compartment Sac - 40 x 22 x
22 |
| |
2 |
Custom Front Open
Bow Sac (under seats) - 40 x 22 x 6 |
| |
3 |
Custom Distribution
Flow Valve |
| |
1 |
50' of 1" reinforced
black bildge hose |
| |
3 |
Check Valve
T-Assembly for venting |
| |
30 |
hose clamp |
| |
all |
custom fittings (all
preinstalled with PVC cement) |
| |
|
|
| |
|
|
| PART# W715 |
2 |
Custom Rear V-Drive
Compartment Sac - 40 x 22 x 22 |
| |
2 |
Custom Front Open
Bow Sac (under seats) - 40 x 22 x 6 |
Custom Sacs - W507-C
ANY SHAPE... ANY SIZE...
ANY VALVE CONFIGURATION
You can special order sacs
to suit your needs. We make all of our Fat Sacs™
in house which gives us the ability to create
custom sacs for our customers. The same process
that is used to build our Pro X Series line of
Fat Sacs™ will be utilized to create your custom
sacs. By using our advanced cutting machine,
welding system and Valmex material we can assure
you that your designed sac will be extremely
durable and of the highest quality. You also
decide on which type of Quick Connect fittings
you would like to use, how many there are and
their exact location on the sac. Whether it's a
totally customized integrated system you are
looking for, or just a single sac, let your
creative juices flow because you're in control.
download the custom sac order form

Tsunami Pump - W709
gallons per hour: 1200
The
Tsunami Pump System is designed to fill and
empty sacs at an alarming rate. The tubing we
use is larger in diameter so it doesn't choke
the pump, resulting in greater output. Combine
this with our Quick Connect Valves and you’ll be
riding faster than ever before.
Quick Connect System
mouse over buttons to
see fittings
Our
Quick Connect Valves have been designed with you
in mind. All of the fittings make connecting
pumps and hoses to your Pro X Series Fat Sacs™ a
quick and simple task. No more struggling with
old waterbed valves and water spilling inside
the boat. Simply twist, pull, replace and
Bam!... You're starting your first set. We offer
several different fittings that all work
together to adapt to any of your needs.
All of our sacs come with
W730 and W739 fittings. If you want a check
valve system, you must order it separately.
TIP: If
the cap of your Quick Connect valve becomes hard
to install, apply some o-ring grease to the
o-ring. This will keep your fittings working
smoothly and o-rings in good condition.
|